IHD1EB1R0L產(chǎn)品概述
Electrical Specifications. Inductance: Measured at 1 V with no DC current. Incremental Current: The typical current at which the inductance will be decreased by 5% from its initial zero DC value. Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" (6.35 mm) of the insulating sleeve edge. Operating Temperature: –55°C to +125°C (no load). –55°C to +85°C (at full rated current). Current Rating: Maximum continuous. Operating current (DC or RMS) based on a 40°C temperature rise. Tolerance: 15%.
Mechanical Specifications. Wire: Solid soft copper. Terminals: 20 AWG tinned copper leads. Coating: Polyolefin tubing — flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. Core Material: Ferrite.
Printed Circuit Mounting
Protected By Polyolefin Tubing
High Saturation Bobbin Used Allowing High Inductance with Low DC Resistance
Pre-Tinned Leads
High Resistivity Core Offers Very High Parallel Resistance, Resulting in Maximum Coil Performance
20 Sleeveless Models Available at Reduced Cost
Datasheet
