6GK57861BA602AB0產(chǎn)品概述
The access points of the SCALANCE W780 product line are optimized for the configuration of Industrial Wireless LAN (IWLAN) wireless networks for 2.4 GHz or 5 GHz with data transmission rates up to 54 Mbit/s. They can be used in all applications that require a high degree of operational reliability,even under extremely harsh environmental conditions.
There are three different product series available which differentiate mostly between there different housing design and degree of protection
SCALANCE W784 for installation in a cabinet or integration in devices
SCALANCE W788 for cabinet-free installation indoors
SCALANCE W786 for outdoor environments with demanding climatic requirements
All access points can also work as a Wireless Bridge (WDS) or as a Wireless Client. There are Client-only versions available as well. The W788 and W788 series are available with up to two Wireless interfaces to establish for example connections in 2.4 GHz and 5 GHz at the same time.
With the addition of a replaceable C-Plug memory disk, Access Points or Clients can be exchanged without a programming device. The configuration or application data are secured on the C-PLUG and can be implemented in another Scalance W devices without special know how.
Features:
1x Wireless Radio According to IEEE 802.11a/b/g for 2.4 or 5 GHz and up to 54 Mbit/s
IEEE 802.11e for Wireless Multimedia (WMM)
IEEE 802.11i for Security
Wireless Distribution System (WDS) support for AP-AP Connections
Construction of Redundant Networks with The Rapid Spanning Tree Protocol (RSTP)
VLAN Support
Modern Security Mechanisms (e.g.WPA2, AES,IEEE 802.1x, RADIUS)
In Client Mode:Network and Port Address Translation (NAT/PAT)
Specifications:
Rugged Plastic Enclosure (Plexi-Glass Type), Shock and Vibration-Proof for Severe Mechanical Loading
Tamper-Proof (No Connectors Visible)
High IP65 Degree of Protection Against Dust and Water Jets
Temperature Range –40°C to +70°C
Resistant to Condensation
Resistant to UV Radiation and Saltwater Spray
2x Internal Antennas
1 × RJ45 connection for 10/100 Mbit/s with Power-over-Ethernet According to IEEE 802.3at Type 1 (Corresponds to IEEE 802.3af)
1 × 48 VDC Connection (Redundant Power Infeed), Optional Operation on 12 … 24 VDC or 100 … 240 VAC with Additional Power Supply Integrated into Device
1 × C-PLUG Slot
Function LEDs for Optical Signaling of Faults and Operating States
Mounting: Wall or, With Optional Mounting Set, on S7 Mounting Rail, 35 mm Standard Mounting Rail, or on a Pole
Datasheet
