NCP702SN28T1G產(chǎn)品概述
Noise sensitive applications such as Phase Locked Loops, Oscillators, Frequency Synthesizers, Low Noise Amplifiers and other Precision Instrumentation require very clean power supplies. The NCP702 is a 200 mA LDO that provides the engineer with a very stable, accurate voltage with ultra-low noise and very high Power
Supply Rejection Ratio (PSRR), making it suitable for RF applications. The device doesn’t require an additional noise bypass capacitor to achieve ultra-low noise performance. In order to optimize performance for battery operated portable applications, the NCP702 employs an Adaptive Ground Current feature for ultra-low ground current consumption during light-load conditions.
Features:
Operating Input Voltage Range: 2.0 V to 5.5 V
Available in Fixed Voltage Options: 0.8 to 3.5 V Contact Factory for Other Voltage Options
Output Voltage Trimming Step: 2.5 mV
Ultra-Low Quiescent Current of Typ. 10 A
Ultra-Low Noise: 11 VRMS from 100 Hz to 100 kHz
Very Low Dropout: 140 mV Typical at 200 mA
±2% Accuracy Over Full Load/Line/Temperature
High PSRR: 68 dB at 1 kHz
Thermal Shutdown and Current Limit Protections
Internal Soft-Start to Limit the Turn-On Inrush Current
Stable with a 1 F Ceramic Output Capacitor
Available in TSOP-5 and XDFN 1.5 x 1.5 mm Package
Active Output Discharge for Fast Output Turn-Off
These are Pb-Free Devices
Typical Applications:
PDAs, Mobile Phones, GPS, Smartphones
Wireless Handsets, Wireless LAN, Bluetooth, Zigbee
Portable Medical Equipment
Other Battery Powered Applications