amphenol代理商
專業銷售Amphenol（安費諾）全系列產品-英國2號倉庫
美國1號分類選型新加坡2號分類選型英國10號分類選型英國2號分類選型日本5號分類選型

在本站結果里搜索：    
熱門搜索詞:  Connectors  8910DPA43V02  Amphenol  UVZSeries 160VDC  70084122  IM21-14-CDTRI

76073-00000300-01 - 

Pressure Switch, 35 PSI, Dual Circuit (NO/NC), 1/8-27 NPT Fitting, Screw Term.

Honeywell 76073-00000300-01
聲明：圖片僅供參考，請以實物為準！
制造商產品編號：
76073-00000300-01
倉庫庫存編號：
70111546
技術數據表：
View 76073-00000300-01 Datasheet Datasheet
訂購熱線： 400-900-3095  0755-21000796, QQ:800152669, Email:sales@szcwdz.com
由于產品數據庫龐大，部分產品信息可能未能及時更新，下單前請與銷售人員確認好實時在庫數量，謝謝合作！

76073-00000300-01產品概述

The perfect choice for those demanding pressure switch applications. Hobbs 5000 Series pressure switches incorporate direct-action blade contacts for reliable, consistent switching. The polyimide film diaphragm is compatible with a wide variety of fluids. Ideal for oil and air pressure applications where automotive-style switches won't hold up. Available in normally-open (NO) normally-closed (NC) and dual-circuit (D.C.) electrical contact settings. Note: Dual circuit switches contain one set of normally-open and one set of normally-closed contacts. The set point is determined by the NC circuit. The deadband between the two sets of contacts can range from 2.5 psi for 4 psi set point switches, to 23 psi for 60 psi set point switches.Switches are designed for use with motor oils, hydraulic and transmission oils, jet fuels and other similar hydrocarbon media. They are not recommended for use with hot water, strong acids or high pH fluids. Suitability of application is the responsibility of the user. Do not install in areas of extreme heat or vibration. Avoid installing near exhaust manifolds, mufflers, open flames or other potential sources of media ignition. Always install by using wrench on hex base.Features:
  • Contacts: Silver Alloy, Gold-Plated
  • Temperature Range: –40°F to +250°F (–40°C to +120°C)
  • Operating Pressure: 150 psi for 4, 10 and 15 psi Set Points (250 psi for 60 psi Set Points)
  • Burst Pressure: 750 psi for 4, 10 and 15 psi Set Points (1250 psi for 60 psi Set Points)
  • Proof Pressure: 500 psi
  • Electrical Ratings: Resistive — 15 A @ 6 VDC, 8 A @ 12 VDC, 4 A @ 24 VDC; Inductive — 1 A @ 120 VAC, 0.5 A @ 240 VAC

    • 76073-00000300-01產品信息

      Brand/Series  5000 Series  
      Function  Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  
      Special Features  Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  
      Supply Voltage  24 VDC  
      Termination  Screws  
    關鍵詞         

    76073-00000300-01客戶還搜索了

    • 參考圖片
    • 制造商 / 說明 / 型號 / 倉庫庫存編號
    • PDF
    • 操作

    76073-00000300-01相關搜索

    Brand/Series 5000 Series  Honeywell Brand/Series 5000 Series  Pressure Sensors Brand/Series 5000 Series  Honeywell Pressure Sensors Brand/Series 5000 Series   Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Honeywell Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Pressure Sensors Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Honeywell Pressure Sensors Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.   Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Honeywell Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Pressure Sensors Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Honeywell Pressure Sensors Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.   Supply Voltage 24 VDC  Honeywell Supply Voltage 24 VDC  Pressure Sensors Supply Voltage 24 VDC  Honeywell Pressure Sensors Supply Voltage 24 VDC   Termination Screws  Honeywell Termination Screws  Pressure Sensors Termination Screws  Honeywell Pressure Sensors Termination Screws  
    電話:400-900-3095
    QQ:800152669
    關于我們 | Amphenol簡介 | Amphenol產品 | Amphenol產品應用 | Amphenol動態 | 按系列選型 | 按產品規格選型 | Amphenol選型手冊 | 付款方式 | 聯系我們
    Copyright © 2017 training-know-how.com All Rights Reserved. 技術支持：電子元器件 ICP備案證書號:粵ICP備11103613號