LRH-144產(chǎn)品概述
With this one tool, you can do a complete concrete anchor installation. In the hammer mode, you can use a SDS masonry bit to drill the anchor hole. Then you can change to the drilling mode and use the included bit adapter to drive the screw into the anchor. Plus the LRH-144 has 5 clutch settings so you can use just the right amount of torque for the screw. The 14.4 V LI-ION battery provides plenty of power to drill up to 12 holes of 1⁄2" diameter x 11⁄2" deep in concrete.
Features
High capacity battery: 14.4 V LI-ION
Hammering force: 21.6 kN
Blow rate per minute (rotation with hammering): 0 to 3,800 bpm
Speed at no-load (rotation only): 0 to 1,000 rpm
Clutch torque: 13 to 48.7 in-lb (5 stages — 8.8 in-lb per stage)
3⁄4" SDS-plus bit system
Ergonomic soft rubber grip for stress reduction
Electronic performance monitoring system provides longer battery life
Charging time (using LBC-81B charger): Usable: 35 minutes ? Full: 50 minutes
Dust-proof switch ensures long life
Adapter for hex shank bits
Datasheet
