VM800C35A-N產(chǎn)品概述
The VM800C is a development module for FTDI's FT800, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as an SPI slave, and requires a SPI Master for proper micro-controller interfacing and system integration.
VM800C modules support 3 different LCD panel size options. Users can also connect to different LCD screens as long as they meet the FT800 technical specification and fit the VM800C LCD connector.
VM800C35A-D, 3.3/5 V micro-controller adaptor card with 3.5" LCD touch display
VM800C43A-D, 3.3/5 V micro-controller adaptor card with 4.3" LCD touch display
VM800C50A-D, 3.3/5 V micro-controller adaptor card with 5.0" LCD
VMFT800C35A-N, 3.3/5 V micro-controller adaptor card, with 3.5" LCD connector but no display
VMFT800C43A-N, 3.3/5 V micro-controller adaptor card, with 4.3/5.0" LCD connector but no display
Features:
The VM800C utilises the FTDI FT800 Embedded Video Engine. Graphic, audio and touch features of the FT800 can be accessed with the VM800C. For a full list of the FT800’s features please see the FT800 datasheet.
The VM800C has the following features:
Ready to use LCD module
Part types with LCDs supporting resistive touch with pressure sensing
On board LCD backlight LED Driver
Supports mono audio output
On board audio power amplifier and micro speaker
Flexible power supply. Powering the VM800C using either a 2.1 mm power jack , SPI master connector or via USB Micro-B port
5 V tolerant buffers when used with a 5 V SPI Master
Datasheet
